Description: OspreyNestsites is an ESRI SDE Feature Class showing a 0.5 mile buffer zone around active, inactive, destroyed, undetermined, and unknown Osprey (Pandion haliaetus) nests in Colorado. Refer to the metadata for the Status attribute field for activity definitions. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: PeregrineNestingArea is an ESRI SDE Feature Class showing Nesting Areas for Peregrine Falcons in Colorado. Nesting Area is defined as an area which includes good nesting sites and contains one or more active or inactive nest locations. The boundaries are drawn based on professional judgment to include most known nesting habitat in the vicinity. Usually these areas are mapped as polygons around cliffs and include a 0.5 mile buffer surrounding the cliffs. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BighornSevereWinter is an ESRI SDE Feature Class showing that part of the winter range where 90% of the individual animals are located when the annual snowpack is at its maximum and/or temperatures are at a minimum in the two worst winters out of ten. Not all populations exhibit migratory behavior during severe winters, many will stay within the defined winter range regardless of conditions. Thus, some populations may not have a mapped severe winter range distribution. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BighornProductionArea is an ESRI SDE Feature Class showing production (lambing) areas for bighorn sheep in Colorado. Production areas are defined as that part of the overall range occupied by pregnant females during a specific time period in the spring. This time period is May 1 to June 30 for Rocky Mtn bighorn sheep, and February 28 to May 1 for desert bighorn sheep. Only known production areas are mapped. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BighornWinterConcentration is an ESRI SDE Feature Class showing that part of the winter range where animal densities are at least 200% greater than the surrounding winter range density during the same period used to define the winter range, in the average five winters out of ten. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BighornWinterRange is an ESRI SDE Feature Class showing that part of the overall range where 90% of the individuals are located during the average five winters out of ten, from the first heavy snowfall to spring green-up, or as a specific period which may defined for each unit. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BaldEagleCommunalRoosts is an ESRI SDE Feature Class showing communal roost sites for Bald Eagle (Haliaeetus leucocephalus) in Colorado. Communal Roost Sites are defined as groups of or individual trees that provide diurnal and/or nocturnal perches for more than 15 wintering bald eagles; these trees are usually the tallest available trees in the wintering area. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BaldEagleNestSites is an ESRI SDE Feature Class showing a 0.5 mile buffer zone around active, inactive, destroyed, undetermined, and unknown Bald Eagle (Haliaeetus leucocephalus) nests in Colorado. Refer to the metadata for the Status attribute field for activity definitions. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BaldEagleRoostSites is an ESRI SDE Feature Class showing a 0.25 mile buffer zone around Bald Eagle (Haliaeetus leucocephalus) roost sites in Colorado. Roost sites are defined as groups of or individual trees that provide diurnal and/or nocturnal perches for less than 15 wintering bald eagles; these trees are usually the tallest available trees in the wintering area and are primarily located in riparian habitats. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: BaldEagleWinterConcentration is an ESRI SDE Feature Class showing winter concentration areas for Bald Eagle (Haliaeetus leucocephalus) in Colorado. Winter Concentration Areas are defined as areas (trees, islands, etc.) within an existing winter range where eagles concentrate between November 15 and April 1. These areas may be associated with roost sites. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: PronghornMigrationCorridors is an ESRI SDE Feature Class showing Migration Corridors of Pronghorn Antelope. Migration Corridors is defined as a specific mappable site through which large numbers of animals migrate and the loss of which would change migration routes. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: PronghornWinterConcentrationArea is an ESRI SDE Feature Class showing Winter Concentration Areas of Pronghorn Antelope. Winter Concentration Area is defined as that part of the winter range where animal densities are at least 200% greater than the surrounding winter range density during the same period used to define winter range in the average five winters out of ten. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: KitFoxHistoricOverallRange is an ESRI SDE Feature Class showing those areas known to be utilized by kit fox in Colorado. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).Kit Fox were last observed in Colorado in the 1990's.These data were last updated in 2011.
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Name: White-Tailed Prairie Dog Overall Range (2018)
Display Field: ACTIVITYCO
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: WTPrairieDogOverallRange is an ESRI SDE Feature Class showing an area which encompasses all known seasonal activity areas within the range of a population of white-tailed prairie dogs. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: MoosePriorityHabitat is an ESRI SDE Feature Class showing habitat types associated with the food and cover requirements of moose. Significant loss of these habitats would change moose distribution and/or would adversely affect the population. These habitat types include but are not limited to willow dominated riparian areas, sub-climax coniferous forest mixed with shrub lands, and dense climax coniferous forests. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: MooseConcentrationArea is an ESRI SDE Feature Class showing that part of the range of a species where densities are 200% higher than the surrounding area during a specific season. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: MooseWinterRange is an ESRI SDE Feature Class showing that part of the overall range where 90% of the individuals are located during the winter months. This winter time frame will be delineated with specific start/end dates for each moose population within the state (i.e.: November 15 to April 1). This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: GrSageGrouseProductionArea is an ESRI SDE Feature Class showing those areas that would include the majority of important sage grouse nesting habitat. Mapped as a buffer zone of 4 miles around Active lek points from GrSageGrouseLeks and clipped to GrSageGrouseOverallRange. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).These data were last updated in 2018.
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Name: Greater Sage Grouse Core Range (Linkages - 2018)
Display Field: Link_Type
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Greater sage grouse GIS dataset identifying linkage areas between sage grouse populations. The data set was created by mapping efforts of the Colorado Division of Wildlife (now Colorado Parks and Wildlife) biologists for the Statewide conservation plan in 2005, and further refined in early 2012. The linkage areas were delineated based on a selection of vegetation classes in the Colorado Basin-wide dataset. The following list shows the vegetation classes used to assist the biologists in delineating the areas. Linkages Vegetation Classes Determined by Pam Schnurr and Brad Petch on 11/20/2005 from Basinwide Vegetation classes Agriculture Land Bitterbrush Community Bitterbrush/Grass Mix Disturbed Rangeland Disturbed Soil Dryland Ag Foothill and Mountain Grasses Forb Dominated Grass Dominated Grass/Forb Mix Grass/Forb Rangeland Grass/Misc. Cactus Mix Grass/Yucca Mix Greasewood Irrigated Ag Juniper/Mtn Shrub Mix Juniper/Sagebrush Mix Mesic Mountain Shrub Mix PJ-Mtn Shrub Mix PJ-Oak Mix PJ-Sagebrush Mix Rabbitbrush/Grass Mix Rangeland Sagebrush Community Sagebrush/Gambel Oak Mix Sagebrush/Grass Mix Sagebrush/Greasewood Sagebrush/Mesic Mtn Shrub Mix Sagebrush/Rabbitbrush Mix Salt Desert Shrub Community Saltbrush Community Serviceberry/Shrub Mix Shrub/Brush Rangeland Shrub/Brush/Forb Mix Snowberry Snowberry/Shrub Mix Sparse Juniper/Shrub/Rock Mix Sparse PJ/Shrub/Rock Mix Winterfat/Grass Mix Xeric Mountain Shrub Mix Update: In August 2012, this dataset was modified to correct topology errors between the Linkages dataset and the PPH and PGH dataset.
Copyright Text: Colorado Parks and Wildlife GIS Group, Species Conservation Unit, Biologists, District Wildlife Managers and Researchers
Description: Greater sage-grouse GIS data set identifying Preliminary Priority Habitat (PPH) and Preliminary General Habitat (PGH) within Colorado. This data is a combination of mapped grouse occupied range, production areas, and modeled habitat (summer, winter, and breeding).PPH is defined as areas of high probability of use (summer or winter, or breeding models) within a 4 mile buffer around leks that have been active within the last 10 years. Isolated areas with low activity were designated as general habitat.PGH is defined as Greater sage-grouse Occupied Range outside of PPH.Datasets used to create PPH and PGH:Summer, winter, and breeding habitat models. Rice, M. B., T. D. Apa, B. L. Walker, M. L. Phillips, J. H. Gammonly, B. Petch, and K. Eichhoff. 2012. Analysis of regional species distribution models based on combined radio-telemetry datasets from multiple small-scale studies. Journal of Applied Ecology in review.Production Areas are defined as 4 mile buffers around leks which have been active within the last 10 years (leks active between 2002-2011).Occupied range was created by mapping efforts of the Colorado Division of Wildlife (now Colorado Parks and Wildlife – CPW) biologists and district officers during the spring of 2004, and further refined in early 2012. Occupied Habitat is defined as areas of suitable habitat known to be used by sage-grouse within the last 10 years from the date of mapping. Areas of suitable habitat contiguous with areas of known use, which do not have effective barriers to sage-grouse movement from known use areas, are mapped as occupied habitat unless specific information exists that documents the lack of sage-grouse use. Mapped from any combination of telemetry locations, sightings of sage grouse or sage grouse sign, local biological expertise, GIS analysis, or other data sources. This information was derived from field personnel. A variety of data capture techniques were used including the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35). Update: In August 2012, this dataset was modified to correct topology errors and clipped to the Colorado boundary.
Copyright Text: Colorado Parks and Wildlife GIS Group, Species Conservation Unit, Biologists, District Wildlife Managers and Researchers
Description: Greater sage-grouse GIS data set identifying Preliminary Priority Habitat (PPH) and Preliminary General Habitat (PGH) within Colorado. This data is a combination of mapped grouse occupied range, production areas, and modeled habitat (summer, winter, and breeding).PPH is defined as areas of high probability of use (summer or winter, or breeding models) within a 4 mile buffer around leks that have been active within the last 10 years. Isolated areas with low activity were designated as general habitat.PGH is defined as Greater sage-grouse Occupied Range outside of PPH.Datasets used to create PPH and PGH:Summer, winter, and breeding habitat models. Rice, M. B., T. D. Apa, B. L. Walker, M. L. Phillips, J. H. Gammonly, B. Petch, and K. Eichhoff. 2012. Analysis of regional species distribution models based on combined radio-telemetry datasets from multiple small-scale studies. Journal of Applied Ecology in review.Production Areas are defined as 4 mile buffers around leks which have been active within the last 10 years (leks active between 2002-2011).Occupied range was created by mapping efforts of the Colorado Division of Wildlife (now Colorado Parks and Wildlife – CPW) biologists and district officers during the spring of 2004, and further refined in early 2012. Occupied Habitat is defined as areas of suitable habitat known to be used by sage-grouse within the last 10 years from the date of mapping. Areas of suitable habitat contiguous with areas of known use, which do not have effective barriers to sage-grouse movement from known use areas, are mapped as occupied habitat unless specific information exists that documents the lack of sage-grouse use. Mapped from any combination of telemetry locations, sightings of sage grouse or sage grouse sign, local biological expertise, GIS analysis, or other data sources. This information was derived from field personnel. A variety of data capture techniques were used including the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35). Update: In August 2012, this dataset was modified to correct topology errors and clipped to the Colorado boundary.
Copyright Text: Colorado Parks and Wildlife GIS Group, Species Conservation Unit, Biologists, District Wildlife Managers and Researchers
Description: ElkMigrationCorridors is an ESRI SDE Feature Class depicting Migration Corridors for Elk in Colorado. Migration Corridors is defined as a specific mappable site through which large numbers of animals migrate and loss of which would change migration routes. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: ElkWinterConcentrationArea is an ESRI SDE Feature Class that shows winter concentration areas for elk in the state of Colorado. This dataset represents that part of the winter range of elk where densities are at least 200% greater than the surrounding winter range density during the average five winters out of ten from the first heavy snowfall to spring green-up, or during a site specific period of winter as defined for each Data Analysis Unit. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: ElkProductionArea is an ESRI SDE Feature Class showing elk production areas. This dataset represents that part of the overall range of elk occupied by the females from May 15 to June 15 for calving. Only known areas are mapped and this does not include all production areas for the Data Analysis Unit. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: MuleDeerMigrationCorridors is an ESRI SDE Feature Class showing a specific mappable site through which large numbers of animals migrate and loss of which would change migration routes. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: MuleDeerSevereWinterRange is an ESRI SDE Feature Class showing that part of the overall range where 90% of the individuals are located when the annual snowpack is at its maximum and/or temperatures are at a minimum in the two worst winters out of ten. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: MuleDeerWinterConcentrationArea is an ESRI SDE Feature Class showing that part of the winter range where densities are at least 200% greater than the surrounding winter range density during the same period used to define winter range in the average five winters out of ten. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Description: MuleDeerWinterRange is an ESRI SDE Feature Class showing that part of the overall range where 90% of the individuals are located during the average five winters out of ten from the first heavy snowfall to spring green-up, or during a site specific period of winter as defined for each Date Analysis Unit. Winter range is only delineated for migratory populations. On the Eastern Plains winter range is defined as areas that provide thermal cover for deer. Examples are riparian areas dominated by trees and shrubs, areas of pinyon/juniper, topographic cover such as gullies, draws, canyons, shelter belts and CRP fields that provide adequate cover. This information was derived from field personnel. A variety of data capture techniques were used including drawing on mylar overlays at 1:50,000 scale USGS county mapsheets and implementation of the SmartBoard Interactive Whiteboard using stand-up, real-time digitizing at various scales (Cowardin, M., M. Flenner. March 2003. Maximizing Mapping Resources. GeoWorld 16(3):32-35).
Copyright Text: Colorado Parks and Wildlife Biologists, District Wildlife Managers, and Researchers.
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 72223.819286 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 6 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: N/A Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementAboveAfter Label Expression: [route] Use Coded Values: true Symbol:
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Color: [68, 101, 137, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: baseline Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Myriad Web Pro Font Style: normal Font Weight: bold Font Decoration: none